Fight for speed
Good afternoon!
As is known, the speed of execution of trade orders has a significant impact
on trading results. And not necessarily high speed Internet coming from the provider
fully utilized. Because almost everything you need to give away Wi-Fi and other members of the household.
In the standard scheme of inclusion of Internet access points connected to the WAN port and LAN port of
we have the Internet to your computer. Despite the delay between ports is not very big,
but all the same there, and to the same access point "selects" of the Internet traffic at once, ie,
to the entrance to your computer. On the example of the equipment will tell you how to get first
all Internet traffic, and then give it to Wi-Fi.
To do this you will need another Gigabit NIC (I have three)
So, point by point:
1. Buy or use a second GB. network card and install it in, price
(I have her name TP-LINK) and connect the card to the LAN port of the access point
(I have a Zyxel Keenetic II).
2. Set up the access point as follows.
We go to the Internet tab - IPoE and make the following settings:
Next, go to the Security tab - Firewall and set up rules for your connection interface:
We leave the access point settings, and switch the cable from the access point LAN to WAN port
3. Connect the cable coming of the Internet to another network card (mine is called Cable)
4. We make network configuration:
Right-click the adapter, select Properties - Sharing
We put a check as shown, and select an adapter that is connected to an access point (TP-LINK)
5. Go to the properties of the TP-LINK adapter and selecting TCP / Pv4 protocol
In its properties Asking the following settings:
That's all! You get all network traffic directly from the provider of cable,
without zaderki your access point, and only then are giving some traffic over Wi-Fi
No comments:
Post a Comment